EN Control panel messages 15
1
FUSER LIFE LOW REPLACE KIT (4500)
-or-
FUSER LIFE LOW ORDER KIT (4550)
Approximately 95 percent of the fuser’s life has been consumed.
l Continue printing, or replace the fuser kit. Fuser replacement will
be required in the near future.
FUSER LIFE OUT REPLACE KIT
The fuser has reached the end of its expected life.
l Replace the fuser kit.
INITIALIZING
The message appears when the printer is initially turned on.
l No action is required.
INSTALL DRUM KIT
The drum kit is not installed or is incorrectly installed.
l Verify that the drum kit is correctly installed.
INSTALL TRAY 2
The printer cannot print until media is loaded into Tray 2. The paper
path for Tray 3 passes through Tray 2.
l Insert Tray 2 into the printer so that printing from Tray 3 can
continue or start.
MEMORY FULL STORED DATA LOST
The printer has no available memory. The current job might not print
correctly. Some downloaded fonts might have been deleted.
l Try printing simplified pages. If this does not resolve the problem,
add printer memory.
www.GovTechMedia.com
