A SERVICE OF

logo

Open as PDF
next previous
8765
4321
13
1211109
English
GETTINGTHEBESTRESULTS
Use the nozzles as follows:
Carpets: Use the carpet/hard floor nozzle with the lever in
position(1).Reducesuctionpowerforsmallcarpets.
Hard floors: Use the carpet/hard floor nozzle with the
leverinposition(2).Ifyouhaveacarpet/hardfloornozzle
with two pedals – press the pedal on the right (3) to
vacuumupanimalhair,etc.moreeffectively.
Wooden floors: Use the parquet nozzle (certain models
only,4).
Upholstered furniture: Use the combination nozzle as
shownin(5).
Curtains, lightweight fabrics, etc.: Use the combination
nozzleasshownin(5).Reducesuctionpowerifnecessary.
Frames, bookshelves, etc.: Use the combination nozzle as
shownin(6)orEasyclean(7–certainmodelsonly).
Crevices, corners, etc.: Usethecrevicenozzle(8).
Using the power nozzle
(Requires an Ultra Silencer equipped with a power socket. The
power nozzle is delivered only with certain models, or could
be bought as an accessory.)
9 Attachthenozzletothetube.
10 Connect the power nozzle to the socket on the
vacuumcleaner.
11 Use the clips to secure the cable along the tubes and
hose.
12 The power nozzle starts operating when the vacuum
cleanerisswitchedon.
Using the turbo nozzle
(certain models only)
13 Attachthenozzletothetube.
Note: Do not use the power or turbo nozzle on skin rugs, rugs
with long fringes or a pile depth exceeding 15 mm. To avoid
damaging the carpet, do not keep the nozzle stationary
whilst the brush is rotating. Do not pass the nozzle across
electric cables, and be sure to switch off the vacuum cleaner
immediately after use.
8
2193277-01.indd 8 7/18/07 4:32:46 PM