Operation Instructions On Screen Navigation
19
5.5 On Screen Navigation
1) Splash Screen
When the tool is powered on, the first screen displayed is
referred to as the splash screen. (Fig. 9) This screen tells you
the tool is booting up. Once the tool is fully powered up, the
screen will automatically switch to the live screen.
Fig. 9
2) Live Screen
The live screen is where you will do most of your work. A live
image of what the imager head sees is displayed on the screen.
You can zoom, adjust LED brightness, rotate images and video,
view and capture photos and videos from this screen.
3) Switching from Still Image Capture to Video Capture
The tool defaults to still image capture when powered on. Press 258B
Video/Camera button to switch between still image capture and
video capture as you needed.
4) Adjusting LED Brightness
Pressing RIGHT and LEFT arrow buttons on the key pad (in
the still camera mode) will increase or decrease the LED
brightness. A brightness indicator bar will be displayed on the
screen as you adjust brightness. (Fig. 10)
