Operation Instructions Basic Operation
14
5. Operation Instructions
1IMPORTANT: Always wear safety eye protection to protect your eyes
against dirt and other objects. Follow operation instructions to
reduce the risk of injury from electric shock, entanglement and other
causes.
5.1 Basic Operation
NOTE: When in operation, the cable can be bent into a certain shape.
This may help you operate the cable into confined areas.
1) Hold the tool with LCD screen facing you and press Power
button to turn it on. Wait for two seconds, the first screen – a
splash screen is booting up, and then appear a live screen where
you can do most of your work.
2) Press OK button to capture photos in the camera mode; Press OK
button to begin capturing videos in the video mode. You should
press Camera/Video button to switch the two modes as you
desired.
3) Press UP and DOWN arrow buttons to zoom in or out while in
the camera mode where you can see a zoom indicator bar as you
adjust zoom.
4) Press LEFT and RIGHT arrow buttons to increase or decrease
LED brightness while in the camera mode where you can see a
brightness indicator bar as you adjust LED light intensity.
5) Press Play button to view captured photos and videos.
6) Press Trash Can button to delete captured photos and videos as
you needed when play back captured photos and videos.
7) Press Reverse button to control the direction of the real-time
image and video as you needed in the live screen.
8) Press Setting/Back button to Setup mode or return to the last
viewed screen.
9) Use the supplied accessories to provide application flexibility.
10) Use the supplied USB cable to connect the tool to a PC to upload
and view captured photos and videos.
11) Connect the supplied video-out cable to video-out port of the tool
and the other end of the cable to the video-in port of a TV to view
