Battery Charging Precautions Battery Charging Procedures
13
Fig. 8
There are two means of charging battery:
1) To charge battery by charger: Locate the DC power
source port of the tool. With dry hands, connect the tool to the
mains with charger to start charging.
2) To charge battery by USB cable: Locate the USB port of the tool.
With dry hands, connect the tool to a PC with USB cable to start
charging.
u The battery will begin charging automatically. While the
battery is charging, the charging indicator light will be red.
u When the battery is fully charged, the charging indicator light
will be green.
u Once the battery is charged, it may remain until it is ready to be
used. There is no risk of over-charging the battery. When the
battery has been fully charged, the charger automatically
switches to retention charging.
u Unplug charger from outlet once charging completes.
