SAFETY AND HEALTH CONSIDERATIONS
Before opening tank be sure that it is not pressurized. Be sure that the gauge reads”0 PSI”.
Depressurize the tank before opening it by exhausting pressure through the abrasive gun (#24).
Disconnect the air compressor before opening tank.
Protect yourself and those around you from “overspray”. Remember that your portable abrasive
blaster is shooting a powerful spray of abrasive material. Do not point it at yourself or anyone
around you.
Wear a filter or mask over your mouth when using this unit. You will create a cloud of abrasive
material and debris which is dangerous to inhale.
Remove cover or protect anything around you that might be damaged from direct or indirect contact
with the abrasive spray or particles. Anything subject to contamination damage (computers,
electronics, etc) or anything with a fine surface (automobiles, furniture, etc.) should NOT be near
your pressure blaster.
CAUTION:
1. Pay particular attention to the abrasive hose (#21), abrasive gun (#24) as they will wear out
much more quickly than others pieces.
2. The abrasive hose needs replacing when its side walls develop leaks or show blisters in the
surface. Do not use if any of these problem are present.
SPECIFICATIONS:
Model: ATD-8401
Tank Volume: 5 Gallon
Hose Length: 8 Feet
Working Pressure 60-125PSI
Air Consumption: 6-25CFM
Overall Dimensions: L:18.89” x W: 11.42” x H:32.68”
Weight: 27lbs
