WARNING: When using pneumatic equipment, basic safety precautions should always be
followed to reduce the risk of personal injury and hazards due to over pressurization.
WARNING:๎ Some dust created by abrasive blasting, grinding, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects, or other
reproductive harm. Your risk from exposure varies, depending on how often you do this work. To
reduce your exposure to these chemicals: work in a well-ventilated area, and with approved safety
equipment, such as dust masks that are specifically designed to filter out microscopic particles.
WARNING:๎Always wear eye protection that complies with a recognized standard (CSA or ANSI)
when operating or performing maintenance on this tool. User and bystanders.
READ ALL INSTRUCTIONS BEFORE USING:
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use unit in damp, wet or poorly lit locations. Donโt expose
to rain. Keep work area well lit. Do not use electrically powered air compressors in the presence
of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area.
4. Do not use inappropriate attachments in an attempt to exceed the unit capacities.
5. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
Non-skid footwear is recommended. Always wear the hood (included), a dust mask and
heavy-duty canvas gloves.
6. Use eye and ear protection. Always wear ANSI approved chemical splash goggles when
working with chemicals. Wear an ANSI approved dust mask or respirator when working around
metal, wood and chemical dusts and mists.
7. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across
running machines.
8. Keep machine clean for better and safer performance. Follow the instructions for lubricating and
changing accessories. Inspect compressors cord periodically and if damaged have it repaired
by a qualified technician. Inspect all hoses for leak prior to use. The handle must be kept clean,
dry and free from oil and grease at all times.
9. Be sure that keys and adjusting wrenches are removed from the unit or work surface before
using.
