© Adam Equipment Company November 2011
12
6.0 TECHNICAL PARAMETERS
To enter this section, press and hold the [Mode] and the [Tare] key
while you turn on the indicator. The display will show the revision
number and then the first parameter Zero Tracking as “ZEO”
6.1 ZERO TRACKING
• When ZEO is displayed, press [Unit] to change to the other
setting.
“ZEO= 0FF“ Zero tracking function is disabled.
“ZEO= O
n
” Zer0 tracking function is enabled.
• Press the [Mode] key to store the desired setting and move
to the next function.
6.2 UNIT SETTING
The user will be able to enable the weighing units to be used - grams,
pounds or ounce. Kilogram is the default weighing unit.
• When g is displayed, press the [Unit] key to change to the
other setting.
“g= 0FF“ Gram unit is disabled.
“g= O
n
” Gram unit is enabled.
• Press the [Mode] key to store the desired setting and move
to the next unit setting.
