A SERVICE OF

logo

Configuring Port Mirroring
19-2
19
Web – Click Port, Mirror Port Configuration. Specify the source port, the traffic type
to be mirrored, and the monitor port, then click Add.
Figure 19-1 Mirror Port Configuration
CLI – Use the interface command to select the monitor port, then use the port
monitor command to specify the source port. Note that default mirroring under the
CLI is for both received and transmitted packets.
Console(config)#interface ethernet 1/10 45-1
Console(config-if)#port monitor ethernet 1/13 48-1
Console(config-if)#