Filter
Top Products
ENGLISH
7
The following table describes the LEDs on the ZyXEL G-162.
LED COLOR STATUS DESCRIPTION
On The ZyXEL G-162 is receiving power. PWR Green
Off The ZyXEL G-162 is not receiving power.
Blinking The ZyXEL G-162 is receiving or sending data. LINK Green
Off The ZyXEL G-162 is not receiving or sending data.
5 Introduction to OTIST
In a wireless network, the wireless clients must have the same SSID and security
settings as the access point (AP) or wireless router (we will refer to both as “AP”
here) in order to associate with it. Traditionally this meant that you had to configure
the settings on the AP and then manually configure the exact same settings on each
wireless client.
OTIST (One-Touch Intelligent Security Technology) allows you to transfer your
AP’s SSID and WEP or WPA-PSK security settings to wireless clients that support
OTIST and are within transmission range. You can also choose to have OTIST
generate a WPA-PSK key for you if you didn’t configure one manually.
6 Enabling OTIST
You must enable OTIST on both the AP and wireless client before you start
transferring settings.
We use the Prestige 334WT and the G-162 screens in this guide as an example.
Screens may vary slightly for your ZyXEL devices.