Filter
Top Products
ENGLISH
12
7 Notes on OTIST
1. If you enabled OTIST in the wireless client, you see this screen each time
you start the ZyXEL Utility. Click Yes for it to search for an OTIST-
enabled AP.
2. If an OTIST-enabled wireless client loses its wireless connection for more
than ten seconds, it will search for an OTIST-enabled AP for up to one
minute. (If you manually have the wireless client search for an OTIST-
enabled AP, there is no timeout; click Cancel in the OTIST progress screen
to stop the search.)
3. When the wireless client finds an OTIST-enabled AP, you must still click
Start in the AP OTIST web configurator screen or hold in the Reset button
(for one or two seconds) for the AP to transfer settings.
4. If you change the SSID or the keys on the AP after using OTIST, you need
to run OTIST again or enter them manually in the wireless client(s).
5. If you configure OTIST to generate a WPA-PSK key, this key changes
each time you run OTIST. Therefore, if a new wireless client joins your
wireless network, you need to run OTIST on the AP and ALL the wireless
clients again.