Filter
Top Products
ENGLISH
2
1 Installation Requirements
Before installation, make sure you have a computer with the following:
• Pentium II 300MHz or above
• A minimum of 6 MB available hard disk space
• A minimum of 32 MB RAM
• A CD-ROM drive
• A CardBus slot
• Windows 98 Second Edition, Windows Me, Windows 2000 or Windows
XP
• Windows 98 SE users may need the Windows 98 SE CD
) If you install the Funk Odyssey Client software on the
computer, uninstall (remove) it.
2 Driver Installation for Windows XP
If you want to use the Windows XP Wireless Zero Configuration (WZC) service to
manage the ZyXEL G-162, follow the steps below to install the driver only.
1. Locate an available CardBus slot on the computer.
2. With the pin connectors facing the slot and the LED side facing up, slide
the ZyXEL G-162 into the slot. The LEDs turn on if the ZyXEL G-162 is
properly inserted.
) Never bend, force or twist the ZyXEL G-162 into the slot.