Filter
Top Products
5-26
Configuration
5.8.1. Network Parameters
In the Text Interface, these parameters are accessed via the Network Configuration
menu (Figure 5.9.) In the Web Browser Interface, these parameters can be found by first
clicking the "Network Configuration" link, and then Clicking the "Network Parameters"
link to display the Network Parameters menu (Figure 5.11.)
• IP Address: (Default = 192.168.168.168.)
• Subnet Mask: (Default = 255.255.255.0.)
• Gateway Address: (Default = undefined.)
• DHCP: Enables/Disables Dynamic Host Configuration Protocol. When this option
is "On", the RSM will perform a DHCP request. Note that the MAC address for the
RSM is listed on the Network Status Screen. (Default = Off.)
Note: Before configuring this feature via Telnet or Web, make certain your
DHCP server is set up to assign a known, fixed IP address. You will need this
new IP address in order to reestablish a network connection with the RSM unit.
• Telnet Access: Enables/disables Telnet access. When Telnet Access is "Off," users
will not be allowed to establish a Telnet connection to the unit. (Default = On.)
• Web Access: Enables/disables the Web Browser Interface. When disabled, users
will not be allowed to contact the unit via the Web Browser Interface.
(Default = Off.)
• SSH Access: Enables/disables SSH communication. (Default = On.)
• SYSLOG Address: The IP Address or domain name (up to 64 characters) for the
Syslog Daemon that will receive log records generated by the RSM. For more
information, please refer to Section 9. (Default = 0.0.0.0.)
• Ping Access: Enables/Disables response to the ping command. When Disabled,
the RSM will not respond to Ping commands. (Default = On.)
• Raw Socket Access: Enables/Disables Raw Socket Protocol access to the
Network Port via Direct Connect. (Default = Off.)
Figure 5.11: Network Parameters Menu (Web Browser Interface)