Filter
Top Products
5-15
Configuration
To create new user accounts, proceed as follows:
• Text Interface: From the User Directory menu, type 2 and press [Enter]. The Add
Username menu (Figure 5.5) will be displayed.
• Web Browser Interface: From the Edit User menu, click the "Add User" link. The
RSM will display the Add User menu (Figure 5.6.)
The Add Username Menu can be used to define the following parameters for each new
account:
• Username: Up to 32 characters long, and cannot include non-printable characters.
Duplicate usernames are not allowed. (Default = undefined.)
• Password: Five to sixteen characters long, and cannot include non-printable
characters. Note that passwords are case sensitive. (Default = undefined.)
• Supervisor Access: Determines whether the account is allowed to invoke
Supervisor commands. (Default = Off.)
• Port Access: Determines which port(s) this account will be allowed to create
connections with. (Default = All Ports Off.)
• Callback Number: Assigns a number that will be called when this user attempts
to access command mode via modem at an RSM port, where the Callback Security
Function has been enabled as described in Section 5.4.4. (Default = undefined.)
Notes:
• If the Callback Number is not defined, then Callbacks will not be performed
for this user.
• If the Callback Number is not defined for a given user, and the Callback
Security feature is configured to use either of the "On - Callback" options,
then this user will be granted immediate access to command mode via
modem.
• If the Callback Number is not defined for a given user, and the Callback
Security feature is configured to use the "On - Callback ONLY" option, then
this user will not be able to access command mode via a Modem Mode port.