Filter
Top Products
6F3B0250
Basic Hardware and Function
101
6. Programming Information
Device/
re
g
ister
Name Function
SW07 Clock/calendar (Year) Lower 2 di
g
its of the calendar year
(98, 99, 00, 01, ... )
SW08 Clock/calendar (Month) Month (01, 02, ... 12) They are stored in
SW09 Clock/calendar (Day) Day (01, 02, ... 31) the lower 8 bits by
SW10 Clock/calendar (Hour) Hour (00, 01, ... 59) BCD code
SW11 Clock/calendar (Minute) Minute (00, 01, ... 59) (T1S only)
SW12 Clock/calendar (Second) Second (00, 01, ... 59)
SW13 Clock/calendar (Week) Day of the week
(Sun = 00, Mon = 01, ... Sat = 06)
SW14
-
Reserved
SW15 Peripheral support priority Bit 8 (S158) is used to select peripheral support priority
(T1S only)
SW16 Mode of special input
functions
Used to select the special input functions
SW17 Input filter constant Used to set the input filter constant
SW18 Preset values for hi
g
h Used to set the preset values for hi
g
h speed counters
SW19 speed counter
SW20
SW21
SW22 Count values for hi
g
h Present count values of the hi
g
h speed counters are
SW23 speed counter stored
SW24 Hi
g
h speed counter control
fla
g
s
Control fla
g
s for the hi
g
h speed counters
SW25
-
Reserve
SW26 Mode of special output
functions
Used to select the special output functions
SW27 Special output control fla
g
s Control fla
g
s for the pulse/PWM output
SW28 Special output frequency
settin
g
Output frequency settin
g
for the pulse/PWM output
SW29 PWM output duty settin
g
Pulse duty settin
g
for the PWM output
SW30 Analo
g
settin
g
value 1 Input value of the analo
g
settin
g
adjuster V0
SW31 Analo
g
settin
g
value 2 Input value of the analo
g
settin
g
adjuster V1
SW32 AUX LED control Bit 0 (S320) is used to control AUX LED
(T1-40/T1-40S only)
SW33
-
Reserved
SW34 TL-F10 send data TOSLINE-F10 transmission data (send to master)
SW35 TL-F10 receive data TOSLINE-F10 transmission data (receive from master)
SW36 PRG port station address Used to set the pro
g
rammer port station address
(1 to 32) (T1S only)
SW37 PRG port parity Used to set the pro
g
rammer port parity (0=none, 1=odd)
(T1S only)
SW38 PRG port response delay Used to set the pro
g
rammer port response delay time
(0 to 30: 0 to 300ms)
NOTE
(1) For details of SW16 though SW31, refer to section 8.
(2) For details of SW34 and SW35, refer to the Expansion I/O manual.
(3) For details of SW36 through SW38, refer to the Communication function
manual.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net