Filter
Top Products
12
Using memory cards
You can save and load game or other data using
the memory card (8MB) (for PlayStation
®
2) or
memory card (each sold separately).
Differences between the memory
card (8MB) (for PlayStation®2) and
memory card
When playing PlayStation
®
2 format
software, use the memory card (8MB*)
(for PlayStation
®
2) (1).
When playing PlayStation
®
format software,
use the memory card (2).
For the PlayStation
®
game console, units of
game data are described as “memory blocks,”
however for the PlayStation
®
2 console, they are
described as “KB” (kilobytes).
* 8 MB = 8,000 KB
1 Memory card (8MB) (for PlayStation
®
2)
(sold separately)
The memory card (8MB) (for PlayStation
®
2)
can save and load PlayStation
®
2 format
software game data. Each memory card (8MB)
(for PlayStation
®
2) can save about 8 MB of
game data, but some of this may be used as file
control information.
The memory card (8MB) (for PlayStation
®
2)
uses MAGICGATE, a technology that helps
protect copyrighted content through data
encryption and hardware authentication.
is a term of copyright protection
technology developed by Sony Group.
does not guarantee compatibility with
other products bearing the “MagicGate” trademark.
2 Memory card (sold separately)
The memory card can save and load
PlayStation
®
format software game data. Each
memory card can save 120 KB (15 memory
blocks) of game data.
Note
You cannot copy data to a memory card (8MB) (for
PlayStation
®
2) or memory card that does not have enough
memory available. Before playing, check how much space
is needed to save the game and how much space is
available on the memory card (8MB) (for PlayStation
®
2) or
memory card. Check the appropriate software manual to
determine the amount of space needed to save the data for
a given game.
Inserting
the memory card (8MB)
(for PlayStation®2) or memory
card
Insert the memory card (8MB) (for PlayStation
®
2)
or the memory card into the MEMORY CARD
slot, with the arrow side up.
Notes on using the memory card (8MB) (for
PlayStation
®
2) or memory card with a
multitap
•When using PlayStation
®
2 format software,
use the SCPH-10090 G multitap
(for PlayStation
®
2).
When using PlayStation
®
format software,
use the SCPH-1070 G multitap.
•When you insert the SCPH-1070 G multitap into
controller port 1, do not insert the memory card
(8MB) (for PlayStation
®
2) or memory card into
memory card slot 1 of the PlayStation
®
2
console. This also applies when you insert a
multitap into controller port 2. If you do so, the
data may be lost.
Checking/copying/deleting
game data
You can copy game data from one memory
card (8MB) (for PlayStation
®
2) or memory card
to another or delete data you no longer wish to
keep.
You cannot, however, copy game data of the
PlayStation
®
2 format software to the memory
card.
You can check, copy and delete game data in
the Browser screen. For details on the browser,
see “Checking/copying/deleting data” on
page 8.
Note
You cannot save or load game data in the Browser screen.
For details on game data saving or loading, refer to the
software manual.
MEMORY CARD slot 2MEMORY CARD slot 1
Playing an audio CD
Playing an audio CD
1 Press the A (open) button.
The disc tray opens.
2 Place a disc on the disc tray with
the label side facing up (data
side down).
3 Press the A button.
The disc tray closes.
4 Use the directional buttons to
select the audio CD icon, and
press the ✕ button.
The audio CD screen is displayed.
5 Select the track number you
want to play and press the ✕
button.
Playback begins.
Ending audio CD playback
1 Press the A (open) button.
The disc tray opens.
2 Remove the disc.
3 Press the A button.
The disc tray closes.
4 Press and hold down the
1 (standby)/reset button for
more than three seconds.
The console enters standby mode.
Operating the CD player
The CD player can be operated using the
Control Panel or directly with the buttons on
the analog controller (DUALSHOCK
®
2). You
can also operate the CD player using the
SCPH-10420 G DVD remote control (for
PlayStation
®
2), which is sold separately.
During playback, select the icon in the CD
operation screen using the directional buttons.
Then press the X button.
N Start playback
X Pause
x Stop playback
. Find the beginning of the current or
previous track
> Find the beginning of the next track
m Fast reverse
M Fast forward
Music discs encoded with copyright
protection technologies
The audio CD playback feature of this product is
designed to conform to the Compact Disc (CD)
standard. Recently, some record companies have
started marketing music discs encoded with
copyright protection technologies. Some of these
music discs do not conform to the CD standard,
and may not be playable on this product.
L1 button:
.
(Previous)
L2 button:
m (Fast
reverse)
R2 button:
M(Fast
forward)
START button:
N (Start)/ X (Pause)
R1 button:
> (Next)
SELECT button:
x (Stop)