Filter
Top Products
137
Additional information
US
Troubleshooting
The Web page won't display properly.
, Some Web pages may not display properly.
There is no sound, or the sound quality from the headphones is
poor.
, Check that the headphones are fully inserted into the system ( page 28).
, Check that the headset connector and the headphone plug are clean. If not,
wipe them with a dry, soft cloth. See also "There is no sound."
( page 133).
The remote control does not work.
, Check that the headphones are fully inserted in the system ( page 28).
, Check that the remote control is not in hold mode. If it is, clear hold mode
( page 24).
The system or AC adaptor is warm.
, During use, the system or AC adaptor may become warm. This is not a
malfunction.
The system is turned on, but does not operate.
, Check that the system is not in hold mode. If it is, slide the power/hold
switch up to clear hold mode ( page 35).
, Try sliding the power/hold switch up and holding until the power indicator
turns off. The system will be completely turned off. Then turn on the system
again.
Headphones with remote control
Other issues