Filter
Top Products
3
LED Activity
• Power LED (Blue)
• Activity LED (Red)
Note: The activity LED will also lit up
when a memory card is inserted. It flashes
when accessed.
Installation
Important: The USB 3.0 Multi Card Reader only
works at USB 3.0 speed when connected to a USB
3.0 controller. Otherwise it will work as a USB
2.0 or USB 1.1 card reader when connected to
USB 2.0 or USB 1.1 controller respectively.
In order for the USB 3.0 Multi Card Reader to
work as a USB 3.0 card reader, the driver for your
existing USB 3.0 host controller has to be properly
installed. This card reader will automatically be
detected and installed when connected to the
USB 3.0 port.
1. Connect one end of the USB cable to the
card reader.
2. Connect the other end to a USB port of the
computer.