Filter
Top Products
Testing the headset system and the sound quality
SD Series - User Guide | 15
Testing the headset system and the
sound quality
Adjusting the headset system using the DIP switches
1 Press the Link button on the headset to disconnect an existing wireless
link between base station and headset.
The LEDs on the headset and on the base
station go off.
2 Use a pointed object (e.g. a ball pen) to set the DIP switches to the
desi
red position.
Configuring the handset lifter/hook switch –
DIP switches 1 and 2
The DIP switches 1 and 2 are only assigned a
function on the SD BS,
SD BS ML and SD BS Phone base stations.
1
2
1 2 3 4 5 6
DHSG
Handset Lifter
MSH
Short Range
Long Range
Auto Link ON
Auto Link OFF
Narrowband
Wideband
Limiter
Standard
Extra
Settings
Fast Link
Switch position Function
Manual operation
Lifts/hangs up the handset manually or using
the handset lifter (Sennheiser HSL 10).
Electronic hook switch (DHSG standard)
Call control via the headset system.
For faster link establishment, see Fast Link.
Electronic hook switch (MSH standard)
Call control via the headset system.
Fast Link for DHSG standard and HSL 10 handset
lifter
Recommended for frequent callers. Shorter battery
life. Fast link establishment without delay due to
hidden link to the base station.