Filter
Top Products
28
The items listed below require periodic check and maintenance to retain the performance of this machine and
ensure safe operation.
10. PERIODIC INSPECTION TABLE
Be sure to check once a year to see if Power Cords are damaged, the plug is
securley inserted, dust is accumulated between the Socket Outlet and the Power
Plug, etc. Using the product with dust as is accumulated can cause a fire or
electrical shock.
Periodically once a year, request the place of contact herin stated or the Distrib-
uter, etc. where the product was purchased from, as regards to the interior
cleaning. Using the product with dust as is accumulated in the interior without
cleaning can cause a fire or short circuit accident. Note that cleaning the interior
parts can be performed on a pay-basis.
CLEANING CABINET SURFACES
If the cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid diluted with water and then
squezzed dry. Do not use thinner, benzine, alcohol or chemical dustcloth as these can damage Cabinet surfaces.
CABINET
MONITOR
COIN CHUTE TOWER
Cabinet surfaces
INTERIOR
POWER SUPPLY PLUG
Check Adjuster’s contact with surface.
Check Adjustments.
Cleaning of CRT surfaces.
Check COIN SW.
Coin insertion test.
Cleaining the COIN SELECTOR
Cleaning
Cleaning
Inspection and cleaing
Daily
Monthly
Weekly
Monthly
Monthly
Monthly
As necessary
Annually
Annually
Item
Interval