Filter
Top Products
12 – COAXIAL REMOTE CONTROLLER
Installation
CHECKING INSTALLATION ENVIRONMENT
Please check the following instructions before installation for your safety.
The way of connecting the main product with external devices (COAXIAL BNC)
is very important to build up a proper system.
Do not disassemble the unit; doing so could expose you to dangerous high
voltage points.
INSTALLATION PRECAUTIONS
Make sure you turn off the product before installation.
Do not put a strong force on or shake the product; otherwise it may cause
malfunction.
Keep the product away from areas of strong magnetic fi eld or electric
interference, or wireless devices such as radio or TV set.
Keep clean the installation place during and after the installation.
An abnormal smells from the product is a sign of abnormal condition, which
may cause fi re or electric shock. In this case, disconnect the product from
the main power immediately and contact the retailer for technical help from
authorized servicing.
Keep the product away from a wet fl oor, do not use an unearthed power
extension cable, worn-out power cord, neither forget earth-grounding.
Use a dry cloth only to dirt off the product. If the product is badly dirty, apply
neutral detergent on a cloth that is used to dirt off, and wipe it out with a dry
cloth.
Do not use volatile substances such as alcohol, benzene or thinner as these
may damage the fi nish.
•
•
•
•
•
•
•
•
•
•
•
T
K
1
2
3
4
❖
N