Filter
Top Products
6
8.
Insert the SD memory card to which the HTML document was copied
into the camera
4. Update the HTML document
1.
With the camera turned off, while pressing the !
button (1), press and hold the
6
(Playback)
button (2) down for 2 to 3 seconds
• A message confirming the HTML document update will appear
on the picture display.
2. Press the k button, select [YES], and press the
C/D button
• The HTML document update will start.
• The HTML document update should take about 30 seconds to complete.
•
• If the message, [No rewriting file] is displayed, then the HTML document was not copied to the SD
memory card correctly.Confirm that the file was copied correctly. ( Refer to P.3)
3. After updating the HTML document is completed, the power to the
camera will once turn off automatically, and then the power will turn on
in playback mode
• If there are no image files that have been taken with the camera saved to the SD memory
card, the [No File] message will display.
4. Turn off the power to the camera
5. Check the HTML document version of the camera
Follow the procedures in [1. Check the version of the HTML document] on
page 2, and confirm that the version of the HTML document has changed
• If the SD memory card continues to be used with the HTML document files copied to it, the
number of captured pictures that can be taken will decrease.Please delete the HTML
document on the SD memory card using a computer or format the SD memory card using
the camera.
• Refer to p. 1 for the procedures for formatting the SD memory card.When the SD memory
card is formatted, all files saved to it will be deleted.
2
1