Filter
Top Products
2
1. Check the version of the HTML document
Connect the camera and terminal (smartphone, PC, etc.) to a wireless LAN and then place the
camera in Web Server mode.
Refer to the instruction manual for the camera for further details on the procedures.
Caution
First, make sure to check the version of the HTML document using the below method. There is no
need to update if the HTML document is shown to be the latest version.
1. Turn the Mode Dial to DX
• The ESS-ID and password appear on the picture monitor.
•
2. Enter the ESS-ID and password shown into the selected terminal (PC,
smartphone, etc.) and connect to the wireless LAN
3. Open the web browser on the selected terminal,
and enter the URL displayed on the camera
• Once the camera and terminal have been connected, a menu
screen will appear in the web browser.
4. Tap [Settings] on the menu screen
• The [Settings] screen will appear.
5. Tap [Info]
• The [Information] screen will appear.
6. Check the version of [HTML] under
[Version Info]
• Note that [HTML] does not appear for the default
version (V1.00).
•
7. Turn off the power to the camera
URL
http
:
//
192.168.1.1
URL
http
:
//
192.168.1.1
URL
http
:
//
192.168.1.1