Filter
Top Products
KB3200 Series User’s Manual 3 - 1
III. INSTALLATION
A. CABLE CONNECTION
Take the cable CCBLA-055-2 out of the accessory bag. Connect
the 6 pin DIN male plug of the cable to the 6 pin DIN female connector
at the left of the bottom of the programmable keyboard. Connect the
other end (5 pin DIN male plug) to the PC or a compatible system.
Connect the PC keyboard or any other keyboard wedged input device
such as a CCD scanner to the 5 pin DIN female connector at the bottom
of the programmable keyboard if such connection is required.
For installation in a PS2 or a compatible system with a PS2
interface type KB3200, the cable in the accessory bag should be
CCBLA-055-1. Connect the mini DIN 6 male plug of the cable to the
PS2 or a compatible system. Do all the rest just like that for PC.
KB-3200
PC or PS2 KB
Monitor
PC or PS2
CCBLA-055-2 or
CCBLA-055-1