Filter
Top Products
INPUT
TV
MUTE
DISPLAY
PICTURE
SLEEP
RECALL
POWER
VOL. (left and right) buttons
CH (up and down) buttons
MENU
0-9 (Number buttons)
AUDIO
MTS/SAP
Other buttons:
Press it to switch between AV/DVD input and RF
(antenna) input.
PressthebuttontoselecttheremotecontrolintheTVmode.
Press the button to minimize the volume level. Press
again to restore the original volume level.
Press the button to display the channel information
Press the button to display the picture preset.
Pressthebuttontosetthesleeptimer.
Press the button to return the previous channel. If the
unit is in menu mode, press the Go Back button to return previous
menu screen.
PressthebuttontoturnonandturnofftheTV.
Pressthebuttontoincreaseor
decrease the TV volume.
Pressthebuttontoscanupor
down the current channel list. Press once to select the channel
up or down, press and hold to select your desired channel. If
your TV is in standby mode, press these buttons to turn on TV.
In AV mode, press these two buttons to switch to TV mode.
Displays the TV's Main menu.(See page 7 for details.)
Press number buttons to select
channel and to set time setting directly. Press 0-9 to select a
channel for example, to select channel 10, press 1 and 0 (interval
time should be less than 1.5 seconds), the channel will change
after 1.5 seconds. If you input "0" firstly, when input the second
number, the channel will change to this channel number without
waiting, for example, to select channel 8, press 0 and 8, the
channel will change immediately.
Four preset audio settings for you to select (MEMORY
/STANDARD/NEWS/MUSIC)
This button is not activated for this model.
The buttons on the remote control other than
listed above are not available for TV function.
The Remote Control
TV Function Buttons
5
The Remote Control
Arrow buttons for
TV Menu system