Filter
Top Products
C561M-F (8/06) 9
Specifications
ELECTRICAL
Input Voltage Selectable 100, 120, 240 VAC, 50/60 Hz via the Primary Line Input connector strip
Output
Voltage/Power Selectable 24 VAC (Tap A), 26 VAC (Tap B), or 28 VAC (Tap C) at 100 VA via the
Secondary Output Tap’s connector strip
Fusing One fuse. Select from one of the following supplied fuses:
Three 1.6 A fast-acting fuses (120 VAC)
Three 500 mA fast-acting fuses (240 VAC)
Spare Fuse
Holder Two spare fuse holders (attached to transformer cover)
Required Input
Current 1 amp
MECHANICAL
Contruction Aluminum
Finish Gray polyester powder coat
Cable Entry Two hole plugs will accommodate 3/4-inch (1.91 cm) conduit fittings
(not provided) that meet NEMA Type 4X standards.
Mount Method Four 0.375-inch (0.95 cm) holes on mounting plate.
Latch One stainless steel link-lock latch secured with screw; latch also can be secured
with padlock (not supplied)
GENERAL
Environment Indoor/outdoor
Operating Range -50°F to 122°F (-45.56°C to 50°C)
Weight 6.84 lb (3.10 kg)
Dimension See Figure 5
(Design and product specifications subject to change without notice.)