Panasonic TY-FB12LC Video Game Controller User Manual


  Open as PDF
of 20
 
5
English
Note:
Tousethenetworkfunction,seteach“NETWORKSETUP”settingandmakesuretosetthe“CONTROL
I/FSELECT”to“LAN”.(seepage4)
When“LAN”isset,powerindicatorislitorangewhentheslotpoweristurnedon,thenthepoweristurned
“OFF”withremotecontrol(stand-bystate)regardlessofthe“Slotpower”setting.
Fordetailsonthe“Slotpower”setting,refertotheOperatingInstructionsofthedisplayunit.
■
Command Control
Notes:
• LaytheLANcableawayfromotherconnectioncables(excludingthepowercord).
• Makesurethebroadbandrouterorhubsupports10BASE-T/100BASE-TX.
• Toconnectadeviceusing100BASE-TX,use“category5”LANcable.
• TouchingtheLANterminalwithastaticallychargedhand(body)maycausedamageduetoitsdischarge.
Do not touch the LAN terminal or a metal part of the LAN cable.
• Forinstructionsonhowtoconnect,consultyournetworkadministrator.
Network function of the unit can control the display in the same way as serial control from a network.
Supported commands
Commands used in the serial control are supported.
Fordetailsonserialcontrolcommands,refertotheOperatingInstructionsofthedisplayunit.
Note:
Consult your local Panasonic dealer for detail instructions on command usage.
■
ExampleofNetworkConnection
P
R
/C
R
/R P
B
/C
B
/B
Y/G
COMPONENT/RGB INLAN
AUDIO
Huborbroadbandrouter
LAN cable
(notsupplied)
COMPUTER
Less
than
10cm
Less
than
10cm
Ferritecore
(supplied)
Ferritecore
(supplied)
Installing the Ferrite core
Pull back the tabs
(intwoplaces)
Wind the cable
twice
Open
Press the cable
through and close
SecuringtheLANcable(TH-85PF12U)
Note: In accordance with the Installation Instructions, secure the LAN cable so that it will not become
near the display unit.
When using a pedestal for the installation of the display, use a clamper
suppliedwiththedisplaytosecuretheLANcable.Forusewithanother
method of installation, refer to the corresponding Installation Instructions.
UsingNetworkFunction
Clamper
 previous next