Panasonic TY-FB12LC Video Game Controller User Manual


  Open as PDF
of 20
 
4
English
MULTI DISPLAY SETUP
SET UP TIMER
PRESENT TIME SETUP
NETWORK SETUP
DISPLAY ORIENTATION
LANDSCAPE
MULTI PIP SETUP
PORTRAIT SETUP
2/2SET UP
--:--:--:--:--:--
DHCP
NETWORK SETUP
SAVE
0
192.168. 0. 8
255.255.255. 0
192.168. 0. 1
1024
AUTO
RS-232C
OFF
SUBNET MASK
LAN SPEED
GATEWAY
IP ADDRESS
PORT
CONTROL I/F SELECT
NETWORK ID
MAC ADDRESS
DHCP,IPADDRESS,SUBNETMASK,andGATEWAYsettings
1 SetDHCP.
When“OFF”isselected,IPADDRESSandothersettings
can be set manually.
2 Select the item and press .
3 Enter an address.
I
192.168. 0. 8
IP ADDRESS
1
Use to select a digit.
2
Use to change a number.
3
Press .
Pressing
will cancel the address
change.
4 Select“SAVE”andpress .
PORT setting
1 Select“PORT”andpress .
2 Enter a port number.
I
01024
PORT
1
Use to select a digit.
2
Use to change a number.
3
Press .
Pressing
will cancel the port
number change.
SAVE
Save the current network Setup. Each value set for
DHCP,IPaddress,Subnetmask,andGatewaywill
besaved.If“NG”isdisplayed,checkthesameIP
address is not used within the same network.
DHCP(DHCPclientfunction)
To obtain an IP address automatically using a
DHCPserver,setthisto“ON”.IfDHCPserveris
notused,setthisto“OFF”.
IPADDRESS(IPaddressdisplayandsetting)
EnteranIPaddressifDHCPserverisnotused.
SUBNETMASK(Subnetmaskdisplayandsetting)
EnterasubnetmaskifDHCPserverisnotused.
GATEWAY(Gatewayaddressdisplayandsetting)
EnteragatewayaddressifDHCPserverisnotused.
PORT
Set the port number used for command control.
Theavailablesettingrangeis1024–65535.
When the PJLink™ protocol is used, the port
setting is not necessary.
LANSPEED
Set the connection speed of the LAN environment.
SelectthevaluefromAUTO,10HALF,10FULL,
100HALFor100FULL.
NETWORKID
Set the ID to identify this unit.
Theavailablesettingrangeis0–99.
CONTROL I/F SELECT
SetwhethertocontrolwithRS-232C(serial)or
LAN.When“LAN”isset,powerindicatorislit
orange when the slot power is turned on, then the
poweristurned“OFF”withremotecontrol(stand-
bystate)regardlessofthe“Slotpower”setting.
MACADDRESS
DisplaytheMACaddressofthisunit.However,
the MAC address is not displayed when the
“CONTROLI/FSELECT”issetto“RS-232C”.
Notes:
• TouseaDHCPserver,makesuretheDHCPserverisstarted.
• Contactyournetworkadministratorfordetailsonsettings.
NetworkSetup
Make the various settings to use the network function.
 previous next