Filter
Top Products
E
NGLISH
9
Registration
First Registration
Perform the First Registration when the 3D Eyewear is
used for the fi rst time.
1. Turn on the TV to see.
2. Press Power button for about 1 second to turn the 3D
Eyewear on.
The lamp lights for about 2 seconds and then fl ashes.
The 3D Eyewear will power on and start registration.
Place the 3D Eyewear within 50 cm from the TV while
registration in progress.
3. After the registration is successfully completed, the 3D
Eyewear will reconnect with TV automatically when the 3D
Eyewear is turned on near the TV in 3D mode.
Registration Again
When connection with registered TV fails, or when using
with another TV,re-register the 3D Eyewear.
1. Turn on the TV to see.
2. Within 50 cm from the TV, press Power button until lamp
lights, then release it to start registration.
3. After the registration is successfully completed, the 3D
Eyewear will reconnect with TV automatically when the 3D
Eyewear is turned on near the TV in 3D mode.
* If the registration failed, the 3D Eyewear will power off.
In this case, power off the TV and perform from step 1.