Filter
Top Products
37
Reference
VQT5F61
The sound is interrupted.
¾ The communication range is 10 m. Bring the
Bluetooth
®
device closer to the main unit.
¾ Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the
Bluetooth
®
device closer to the main unit and
distance it from the other devices.
The One-Touch Connection (NFC feature) is
not working.
¾ Turn on the NFC feature of the device.
¾ Depending on the condition of the unit, the
NFC touch area may not respond. Display the
HOME menu and try again.
¾ Depending on the device, the NFC feature
may not function correctly. In such cases,
start up the Bluetooth
®
feature of the device to
set up a connection with it.
Distorted sound or noise is heard.
¾ Adjust the position of the antenna.
A beat sound is heard.
¾ Try to keep a certain amount of distance
between the antenna and the TV.
Noise is excessive.
¾ Change the audio to be output as monaural.
Press [AUDIO] to select “MnO”.
The sound becomes monaural.
≥ To cancel, press the button again or change
the frequency.
In normal circumstances, select “AUtO StErEO”.
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 12, 13, 28)
¾ There may be interference that prevents the
unit from detecting your home network. Place
the unit and the wireless router closer to each
other. This unit may be able to detect your
network name (> 13, “SSID”).
¾ Check the operating instructions for each
device and connect accordingly.
When using wireless LAN connection, video
frames are dropped during playback.
¾ Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
¾ On the “Wireless Settings” screen (> 28), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 13) again.
Radio
MONO
AUTO STEREO
Network
SC-BTT785&465&433&405GNGSGA-VQT5F61_mst.book 37 ページ ２０１４年２月２７日 木曜日 午前１１時２７分