Filter
Top Products
36
VQT5F61
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
¾ Check connections to speakers and other
equipment.
¾ Ensure the speaker settings for your
speakers are correct. (> 27)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 27)
¾ When “BD-Video Secondary Audio” is set to
“On”, Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio
TM
and DTS-HD High
Resolution Audio
TM
are output as DTS Digital
Surround
TM
.
¾ Depending on the connected equipment, the
sound may be distorted if this unit is
connected with an HDMI cable.
¾ The multi-channel audio from a device
connected to the TV is not output in it’s
original multi-channel form.
jIf the device has an optical audio output
terminal, connect the device to this unit’s
DIGITAL AUDIO IN terminal. (> 11)
No surround sound.
¾ Press [SOUND] to select a surround effect.
(> 25)
Cannot switch audio.
¾ When audio is output from the HDMI AV OUT
terminal, set “Dolby D/Dolby D +/Dolby
TrueHD” or “DTS/DTS-HD” to “PCM”. (> 27)
No sound from the TV.
¾ Press [SELECTOR] to select the
corresponding source. (> 14)
¾ Check whether the HDMI terminal on the TV
is labelled “HDMI (ARC)”. If not labelled in this
way, connect using the HDMI cable in
combination with an optical digital audio
cable.
¾ If there is no sound from the equipment
connected to this unit’s DIGITAL AUDIO IN
terminal, please make sure that the optical
audio output of the equipment is set to PCM.
Disc cannot be played.
¾ The disc is dirty. (> 6)
¾ The disc is not finalized. (> 8)
¾ Confirm the “Mixed Data Disc Option” is set
properly. (> 30)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ Confirm that this unit is connected to the
broadband Internet. (> 12)
¾ Confirm the “BD-Live Internet Access”
settings. (> 29)
¾ Confirm a USB device is connected to the
USB port. (> 14)
¾ Connect this unit to the network by a wired
connection.
Alternative soundtrack and subtitles cannot
be selected.
¾ The languages are not recorded on the disc.
¾ You may not be able to use the Option menu
to change the soundtrack and subtitles on
some discs. Use the disc’s menus to make
changes. (> 18)
Pairing cannot be done.
¾ Check the Bluetooth
®
device condition.
The device cannot be connected.
¾ Try pairing the device again.
¾ This system might be connected to a different
device. Disconnect the other device and try
pairing the device again.
The device is connected but audio cannot be
heard through this system.
¾ For some built-in Bluetooth
®
devices, you
have to set the audio output to “Panasonic
BTT” manually. Read the operating
instructions for the device for details.
Sound Playback
Bluetooth
®
SC-BTT785&465&433&405GNGSGA-VQT5F61_mst.book 36 ページ ２０１４年２月２７日 木曜日 午前１１時２７分