Filter
Top Products
13
Getting started
VQT5F61
Settings
The following settings can be performed anytime
in the Setup menu. (> 28, 29)
After connecting your new home theatre for the
first time and pressing [Í], the basic settings
screen will appear.
Preparation
Turn on the TV and select the appropriate
video input.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions to
continue with the settings.
[BTT785]
≥ To use the wireless system, pairing is
required.
Follow the on-screen instructions to pair the
unit with the wireless system.
[BTT785]
≥ The wireless link indicator of the wireless system lights
green when the unit and the wireless system are
connected wirelessly.
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
Select “Wired” or “Wireless” and press [OK].
Follow the on-screen instructions to establish
your connection settings.
≥ If “Wireless LAN Adaptor is not connected.” is
displayed, check that the Wireless LAN Adaptor
is fully inserted. Alternatively, disconnect and
reconnect it.
∫ About the wireless connection
Before beginning wireless connection setup
≥ Obtain your network name (SSID*).
≥ If your wireless connection is encrypted, please
be sure that you know your encryption key.
If your SSID is not displayed;
≥ Search again by pressing the red button on the
remote control.
≥ Stealth SSIDs will not be displayed; in this case,
enter manually by using “Manual setting”.
While displaying the HOME menu, press
[SETTINGS]
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
If your wireless network is encrypted;
Encryption Key input screen will be displayed.
Input the encryption key of your network.
If your wireless router supports WPS (Wi-Fi
Protected Setup
TM
);
You can easily set up a connection by pressing
the green button on the remote control.
≥ Refer to the operating instructions of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
Easy Settings
Easy Network Setting
OK
RETURN
Easy Network Setting
Wired
Wireless
Select a connection mode.
SC-BTT785&465&433&405GNGSGA-VQT5F61_mst.book 13 ページ ２０１４年２月２７日 木曜日 午前１１時２７分