Mitsubishi Electronics FX1S Video Gaming Accessories User Manual


 
FX1S Series Programmable Controllers Installation Notes 3
3-6
3.5 DIN Rail Mounting
Units can be snap mounted to 35mm DIN rail (DIN EN 50022). To release pull the spring
loaded clips away from the rail and slide the unit off and up.
3.6 Termination of Screw Terminals
Cables terminating at a screw terminal of an FX
2N
and FX
0N
product should be fitted with
insulated crimp terminals, see example shown. Terminals screws should be tightened to
between 0.5 to 0.8 N
m. Screw terminals must be secured to prevent a loose connection from
causing a malfunction.
To suit M3 (0.12in)
screw terminals
Max.
6.2mm
0.24 in
Max.
6.2mm
0.24 in
Figure 3.4 : Terminal Crimp Diagram