Filter
Top Products
Connecting to your TV
IMPORTANT! Your TV, VCR or DVD player
must have audio and video input jacks. Input
jacks may be on the back of your TV, VCR or
DVD player.
• Place the base in front of your TV. The base
should be three feet away from the TV.
• Locate the plug-and-play cord on the base.
• Plug the audio-video pins into the match-
ing colored input jacks on your TV, VCR or
DVD player (Yellow for Video In, White for
Audio In).
Hint: The plug-and-play cord is designed
to easily disconnect if it is pulled. Simply
connect the matching connectors located
in the middle of the cord.
• Turn your TV, VCR or DVD player
power ON.
• Press the power button on the base
to turn it ON.
• To nd the picture on your TV screen, set
your TV’s, VCR’s or DVD player’s mode
selector to INPUT or VIDEO IN.
• Slide the power switch on the controller
ON
.
• The controller works best when you are
standing in the range between the base feet.
Hint: Bright sunlight or incandescent light
may affect the range between the base and the
controller. Try dimming the light in the room.
• The base will time out after ve minutes of
inactivity. Press the power button to turn
power OFF and then press again to turn
back ON. The controller will time out after
two minutes of inactivity. Slide the power
switch OFF
and then back ON
.
6
Three
Feet
Base Range
TV
INPUT
AUDIO IN
VIDEO IN
VCR/DVD
OR
White
Yellow
TV