Filter
Top Products
4. press Channel +/- to switch on/off the connected apparatus.
Dimming lamp:
1. aim the remote control on the front of the Mini Controller.
2. press the mode button of your remote control reserved for Home
Automation.
3. select the number of the module via the numerical key board (1-9).
4. press Volume +/- to dim the connected lighting.
Note: when using a Marmitek remote control use code 821 or 0821. To
operate modules with unit codes higher than 9, on most remote controls
the following buttons can be used:
1. ‘10’: press 0 button followed by on (Chan.+) off (Chan -) bright (Vol +)
or dim (Vol -).
2. ‘11’: press AV button followed by on (Chan.+) off (Chan -) bright (Vol +)
or dim (Vol -).
3. ‘12’: press (or record) button followed by on (Chan.+) off (Chan -)
bright (Vol +) or dim (Vol -).
4. ‘13’: press button followed by on (Chan.+) off (Chan -) bright (Vol +)
or dim (Vol -).
5. ‘14’: press button followed by on (Chan.+) off (Chan -) bright (Vol +)
or dim (Vol -).
6. ‘15’: press button followed by on (Chan.+) off (Chan -) bright (Vol +)
or dim (Vol -).
7. ‘16’: press ‘/- button followed by on (Chan.+) off (Chan -) bright (Vol +)
or dim (Vol -).
To switch on all lamps:
1. aim the remote control on the front of the Mini Controller.
2. press the mode button of your remote control reserved for Home
Automation.
3. press ‘power’ button of remote control.
To switch off all modules:
1. aim the remote control on the front of the Mini Controller.
2. press the mode button of your remote control reserved for Home
Automation.
8© MARMITEK