Filter
Top Products
IRRF7243™ MINI CONTROLLER
SAFETY WARNINGS
• To prevent short circuits, this product should only be used inside and
only in dry spaces. Do not expose the components to rain or moisture.
Do not use the product close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high
temperatures or bright light sources.
• Do not open the product: the device contains live parts. The product
should only be repaired or serviced by a qualified repairman.
• In case of improper usage or if you have opened, altered and repaired
the product yourself, all guarantees expire. Marmitek does not accept
responsibility in the case of improper usage of the product or when the
product is used for purposes other than specified. Marmitek does not
accept responsibility for additional damage other than covered by the
legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Only connect the adapter to the mains after checking whether the
mains voltage is the same as the values on the identification tags.
Never connect an adapter or power cord when it is damaged. In that
case, contact your supplier.
• Automatic switching devices provide comfort, but can also be
dangerous. They can surprise people or can ignite clothing hanging
over an electric heat source. Please be careful and take appropriate
measures to avoid accidents.
How does Marmitek X-10 work?
Marmitek X-10 components use the existing mains wiring to communicate
(using Marmitek X-10 signals). You can build a complete system using the
three different kind of components of the Marmitek X-10 System:
1. Modules: These components will receive Marmitek X-10 signals and
will switch or dim the attached lamp or appliance.
2. Controllers: These components will transmit Marmitek X-10 signals and
thus will control the Modules.
3IRRF7243
TM
ENGLISH