Filter
Top Products
Lexicon
22
System
Configuration
LED and redirects the current main zone input to the Record/Zone 2
outputs. From Standby, turns the unit on, selects the last used Zone 2
input, turns Zone 2 volume on to the value selected in the OUTPUT
LEVELS menu and engages full mute in the main zone.
OFF
Turns off the Zone 2 outputs, and the associated front panel LEDs.
OSD (ON)
Displays a STATUS menu for the current input. Press Done to exit.
VOL ▲ and ▼
Displays, then adjusts the current Zone 2 volume level. Activated
displays (FP or OSD) will show level and a bar gauge. When Zone 2
mute is engaged, these controls adjust volume without disengaging
Zone 2 mute.
Mute
Engages Zone 2 mute and reduces the Zone 2 volume level to -80dB.
Pressing again restores Zone 2 volume to its previous level.
SELECT and DONE (remote control only)
Displays, then adjusts Zone 2 left/right balance. Activated displays (FP
or OSD) will show bar gauge and level in dB.
VCR, DVD, V Disc, TV, AUX, CD, Tuner, and Tape
Selects the Record/Zone 2 input and lights the corresponding front
panel input LED (unless the input is blocked). From Standby, the input
is selected with full mute engaged in the main zone.
Dolby, THX, Logic 7, and DTS (remote control only)
These controls set the Zone 2 volume level to the following levels.
Dolby -30dB
THX -20dB
Logic 7 -10dB
DTS +00dB
2 CH, Party, TV M, and Music (remote control only)
These controls set the master volume level to the following levels. When
Zone 2 mute is engaged, these controls set the Zone 2 volume level
without disengaging mute.
2CH -30dB
Party -20dB
TV M -10dB
Music +00dB