Filter
Top Products
3
MC-1 Digital Controller
Installation
The Remote Control
Shift
MC-1
EFFECTS
Record
Zone 2
FP FP
OSD
OSD
OFF
ON
DONE SELECT
Mute
Light
V
O
L
F
X
2 CH
Party TV M
Music
VCR
DVD VDisc
TV
AUX
CD Tuner
Tape
5
8
6
10
11
4
3
7
9
2
1
1 ON, FP and OSD
ON turns the MC-1 on and
selects the input last used
with main and Zone 2 volume
levels set to the levels cho-
sen in the OUTPUT LEVELS
menu.
FP (ON) turns on the front
panel display.
OSD (ON) activates the MC-
1 on-screen display.
2 OFF, FP and OSD
OFF puts the unit into
standby and mutes all of the
outputs.
OSD (OFF) turns off the on-
screen display.
FP (OFF) turns off the front
panel display.
3 SELECT, ▲,▼ and DONE
Allow access to and adjust-
ment of all displayed menu
items. ▲and ▼ step a dis-
play cursor through listed
menu items. SELECT dis-
plays submenus, or chooses
a menu item for adjustment.
The ▲and ▼ buttons alter the
settings of selected param-
eters. DONE saves the cur-
rent changes and exits the
menu.
4 Shift
When pushed in conjunction
with other remote buttons,
activates a set of less-used,
but convenient, functions.
5 Record/Zone 2
When pushed in conjunction
with other remote buttons,
activates a set of Record/
Zone 2 control functions.
6 Light
Toggles the remote control
backlight on and off. (Note:
after seven seconds, the
backlight is automatically
turned off.)
7 FX ▲and ▼
These controls display, then
change the current effect.
The activated displays (FP or
OSD) will show the effect
name.
8 VOL ▲and ▼
These controls display, then
adjust the current master vol-
ume level. The activated dis-
plays (FP or OSD) will show
the volume level and a visual
guage.
When Mute is engaged,
these controls display, then
adjust the volume from the
mute level. When full mute is
engaged (⇑Mute), these con-
trols increase or decrease
the selected volume level
without disengaging full
mute.
9 Mute
Engages Mute and reduces
the volume by the amount
selected in the OUTPUT
LEVELS menu. The red
Mute LED on the front panel
will light and the activated
displays (FP or OSD) will
show MUTE ON. Pressing
again restores the volume to
its pre-Mute level, turns off
the front panel Mute LED,
and displays MUTE OFF on
the active displays.
10 Input Selection
Individual buttons select
from 8 inputs and activate a
corresponding green LED on
the front panel. Depending
on the Setup configuration,
selection may also load a
new effect.
11 EFFECTS
These controls select Dolby,
THX, Logic 7, dts, 2-Chan-
nel, Party, TV Matrix or Music
playback. The actual effect is
determined by the format of
the input signal.
Note: When 2-Channel is
engaged, pressing the but-
ton again will turn it off.