Filter
Top Products
13
MC-1 Digital Controller
S
ystem
Configuration
DISPLAY ADJUST MENU
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
To adjust brightness, use SELECT to highlight BRIGHTNESS, and ▲
or ▼ to set display brightness for the room's lighting conditions. Press
DONE twice to return to the main menu.
Display Adjustment
Depending on the location of the MC-1 in your room, you may need to
adjust the brightness of the front panel display for optimum viewing. To
adjust this display, press the ▲, ▼ or SELECT buttons on the Remote
to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.
Press SELECT to highlight the Display Adjust Menu. Press ▼ to select
FRONT PANEL DISPLAY.
If you want to turn the front panel display off, use SELECT to highlight
STATUS, then use ▲ or ▼ to select OFF. Selecting 2-SECONDS will
cause the display to turn off automatically two seconds after a command
is received. Press DONE twice to return to the main menu.
The Video On-Screen Display
MAIN MENU
EFFECT ADJUST
EQUALIZATION
DISPLAY ADJUST
SETUP
In addition to the front-panel display, the MC-1 contains a character
generator for a video overlay display on monitors. Since the on-screen
display is capable of showing the full menu of options available at any
point, calibration of the system is faster and easier if the MC-1
video
output is connected to a video monitor.
Adjustments to the on-screen display are made from the Display Adjust
menu. To display this menu, press the ▲, ▼ or SELECT buttons on the
Remote to enter the Main Menu. Press ▼ twice to select DISPLAY
ADJUST.
Press SELECT to enter the Display Adjust menu. Press SELECT to
open the On-Screen Display menu.
MAIN MENU
EFFECT ADJUST
EQUALIZATION
DISPLAY ADJUST
SETUP
FRONT PANEL DISPLAY
STATUS
CONTRAST ADJUSTMENT
▲▼
Adjust with or
ALWAYS ON ALWAYS ON, 2 SECONDS, ALWAYS OFF
1-16