Filter
Top Products
35
12 Security
Enabling or Disabling the Phone Lock
The phone lock protects your phone from unauthorized use. By default, the
phone lock is not enabled. The default phone lock code is the last four
digits of the MDN. You can change the default phone lock code to any
numeric string of 1 to 8 digits.
1. Select Settings > Security Settings > Phone Lock.
2. Select one of the following phone lock modes:
5 Minutes, 10 Minutes, 15 Minutes, 30 Minutes or 60 Minutes: Set
the keypad to be locked after the phone is in standby mode for 5
minutes, 10 minutes, 15 minutes, 30 minutes or 60 minutes.
Immediate: Enable the phone lock immediately.
Power On: Enable the phone lock when the phone is powered on next
time.
Off: Disable the phone lock.
Changing the Phone Lock Code
Do remember your phone lock code. If you forget it, contact your local
dealer.
1. Select Settings > Security Settings > Change Phone Code.
2. Enter the correct phone lock code and select OK.
3. Enter the new phone lock code and select OK.
4. Enter the new phone lock code again and select OK.