Filter
Top Products
29D-Link DCS-940L User Manual
Section 4 - Conguration
Motion Detect
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a nite motion area that will be used for monitoring.
Motion
Detection:
Sensitivity:
Area Setting:
File Format:
Pre and Post
Alarm Record:
Select this box to enable the motion detection feature of
your camera.
Species the measurable dierence between two sequential
images that would indicate motion. Please enter a value
between 0 and 10.
Use your mouse to click on the blocks that you would like to
monitor for motion.
When motion is triggered, there are three sorts of le format
can be selected.
1. AVI File (With Record File Setting )
2. Multi-JPEG (With Record File Setting), only with JPEG
compression format.
3. Single JPEG (Single File with Interval Setting)
Pre Alarm and Post Alarm setups for video start and end
time when motion detected.