Filter
Top Products
10
Installation for ESX server must be launched on the Service Console (aka Console Operation System);
installation for ESXi server must be launched on the vMA (vSphere Management Assistant) installed on the
VMware ESXi host computer.
Note: On ESX/ESXi, users may mount the CD by using the mount command. Run mount –t iso9660
/dev/cdrom /mnt/cdrom as a root user. /dev/cdrom is the CD drive and /mnt/cdrom will be the mount point.
Note: On VMware ESXi, users can also upload the installer to vMA by using vSphere Client tool. Visit
VMware website to download vSphere Client tool and refer to FAQ chapter of PowerPanel Business Edition
User’s Manual to know how to upload installer by using vSphere Client tool.
Note: On VMware ESXi, users can deploy vMA by using a file or from an URL. Visit VMware
website for
vSphere Management Assistant Guide document about vMA deployment on VMware ESXi.
The installation procedure will be initiated as following steps:
z Press Enter to start an installation.
z Accept the license agreement.
z Choose the component. In order to simultaneous monitor multiple PDU, Center should be installed. If
one single computer which is powered by the PDU requiring protection, Client should be installed.
Note: Agent should be not selected because of ability to access to UPS instead of PDU.
z Choose the destination location.
z Installation procedure starts and once finished. It will end automatically.