Filter
Top Products
Group Item Setting Description
DELETE Delete
One
Yes / No Deletes the currently displayed photo or video from memory. Use
Up/Down arrows to find the file you want to delete. To delete, high-
light the “Delete One” icon and press “OK”. Then highlight “Yes”
and press “OK” to delete the file.
Delete
All
Yes / No Deletes all stored files. To delete all files, (except locked-see below)
highlight the “Delete All” icon and press “OK”. Then highlight
“Yes” and press “OK” to delete all files currently in memory.
EDITOR Protect Lock /
Unlock
Locking a photo or video file prevents accidental erasure. Can be
used together with “Delete All” to quickly delete all but one or two
photos. To lock the currently displayed photo or video, highlight
the “Lock” icon and press “OK”. To unlock a previously locked file,
select it using the Up/Down arrows, highlight the “Lock” icon again,
and press “OK”.
Rotate -90 Degree
or +90
D
egree
Rotates view of the current image by 90 degrees in either direction.
EXIT Exit Exits the review menu and returns to the last selected review image.
System Requirements (Minimum)
Software Installation
Transferring The Photos & Videos to Your PC - Step by Step
OS: Windows® 98/98SE/2000/ME/XP
CPU: MMX Pentium® 200MHZ equivalent or faster (Pentium® III 500 MHz for PhotoSuite5™)
Memory: 32MB minimum (64MB recommended for PhotoSuite)
SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color
200 MB available hard disk space (if installing PhotoSuite)
Internal USB Port
If you are using Windows 98, you must install drivers before connecting the camera to your PC. Insert the CD-ROM
into your computer’s CD drive; it will auto-run and the install screen will be displayed. Select “Install Driver”, then
follow the directions. After installation, restart your computer. Windows 2000, ME, and XP do not require drivers,
as the camera uses the USB mass storage standard , allowing the photo files to be accessed as if they were stored on
an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer, you may
install Roxio PhotoSuite® from the CD-ROM. Be sure to read the “Release Notes” completely, noting any tips or
potential issues relevant to your PC configuration and OS.
1. Be sure the driver has been installed first if you are on Windows 98/98SE.
2. Make sure the Instant Replay power is on and connect the supplied cable to the camera’s USB port (open the
connector cover on the left side of the Replay), then directly to a main USB port on your computer-do not use front
panel/keyboard USB ports or unpowered “hubs”.
3. The LCD display will turn off to conserve battery power, and
the Instant Replay will be recognized as a standard
“USB Mass Storage” device. This means that the camera files can be easily viewed, edited, or copied to your hard
drive, just as if they were stored on an external hard drive or a CD-ROM.
Review Menus continued
18
19
11-8323 6LIM.indd 18-19 1/28/05 10:45:33 AM