Filter
Top Products
© 1999 Bogen Communications, Inc.
All Rights Reserved. Printed in U.S.A.
Notice
Every effort was made to ensure that the information in
this guide was complete and accurate at the time of print-
ing. However, information is subject to change.
FCC Statement (Part
15) - Radio Frequency
Interference
The Ambient Level Controller generates and uses radio fre-
quency energy and, if not installed and used in strict accor-
dance with the manufacturer's instructions, may cause inter-
ference to radio and television reception. Testing is being
conducted for compliance with the limits for a Class B
device in accordance with the specifications in Part
15 of
the FCC Rules. This testing is designed to provide reason-
able protection against such interference. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to
radio or television reception, which can be determined by
turning the Ambient Level Controller unit off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient the radio or TV receiving antenna.
- Relocate the Ambient Level Controller unit with respect
to the radio or TV receiver or vice-versa.
- Plug the Ambient Level Controller unit into a different
outlet so that it and the radio or TV receiver are on differ-
ent branch circuits.
If necessary, the user should consult the dealer or an expe-
rienced radio/television technician for additional sugges-
tions. The user may find the following booklet, "How To
Identify and Resolve Radio-TV Interference Problems,"
helpful. This booklet was prepared by the Federal
Communications Commission (FCC) and is available from
the U.S. Government Printing Office, Washington, DC
20402. Stock order No. 004-000-00345-4.
Important Safety Information
Always follow these basic safety precautions when installing
and using the system:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the prod-
uct.
3. DO NOT block or cover the ventilation slots and open-
ings. They prevent the product from overheating. DO NOT
place the product in a separate enclosure or cabinet, unless
proper ventilation is provided.
4. Never spill liquid on the product or drop objects into the
ventilation slots and openings. Doing so may result in seri-
ous damage to the components.
5. Repair or service must be performed by a factory
authorized repair facility.
6. The product is provided with a UL-CSA approved, 3-wire
ground type plug. This is a safety feature. DO NOT defeat
the safety purpose of the grounding type plug. DO NOT
staple or otherwise attach the AC power supply cord to
building surfaces.
7. DO NOT use the product near water or in a wet or
damp place (such as a wet basement).
8. DO NOT use extension cords. The product must be
installed within 6 feet of a grounded outlet receptacle.
9. DO NOT install telephone wiring during a lightning
storm.
10. DO NOT install telephone jacks in a wet location
unless the jack is specifically designed for wet locations.
11. Never touch uninsulated wires or terminals, unless the
line has been disconnected at the paging or controller
interface.
12. Use caution when installing or modifying paging or con-
trol lines.
Support Information
Paging systems integrated with small phone systems such as
Merlin Legend and Partner are supported by the National
Service Assistance Center (NSAC). The main number for
the NSAC is 800-628-2888. Paging systems integrated with
large switches such as the DEFINITY G3 are supported by
the Technical Service Center (TSC). The main number for
the TSC is 800-242-2
121.