Agilent Technologies Agilent 6030A Video Gaming Accessories User Manual


 
General Information
14
The serial number prefixes listed on the front of this manual indicate the versions of the supplies that were available when
the manual was issued. If the serial prefix of your supply is not listed in this manual, the manual may include a yellow
"Manual Change’’ sheet. That sheet updates this manual by defining any differences between the version of your supply and
the versions included here, and may also include information for correcting any manual errors. Note that because not all
changes to the product require changes to the manual, there may be no update information required for your version of the
supply.
GP-IB Interconnection Cables and Connectors
Cables for interconnecting GP-IB devices are available in four different lengths. The connector block at both ends of each
GP-IB cable has a plug on one side and a matching receptacle on the other, so that several cables may be connected in
parallel, thus simplifying system interconnection. Lock screws provide secure mounting of each connector block to a GP-IB
instrument, or to another cable connector block.
Model
Agilent 10833A GP-IB Cable, 1 m (3.3 ft.)
Agilent 10833B GP-IB Cable, 2 m (6.6 ft.)
Agilent 10833C GP-IB Cable, 4 m (13.2 ft.)
Agilent 10833D GP-IB Cable, 0.5 m (1.6 ft.)
Agilent 10834A GP-IB Connector Extender
Agilent 5080-2148 Serial Link Cable, 2 m (6.6 ft)
The Agilent 10834A extender was designed to help in cases where rear panel space results in difficult cabling situations.
The extender provides clearance by extending the first connector block 2.3 cm away from the rear panel of the instrument.
Serial link cables may be used to connect power supplies together when programming with SCPI. With serial link cables,
you can connect up to 15 additional power supplies per GP-IB address. See Appendix C for more information
GP-IB Compatibility
The system power supplies implement the following GP-IB interface functions:
SH1(Source Handshake) RL1(Remote Local)
AH1(Acceptor Handshake) PP1(Parallel Poll)
T6(Talker) DC1(Device Clear)
L4(Listener) DT1(Device Trigger)
SR1(Service Request)
Ordering Additional Manuals
One Operating manual is shipped with each power supply. Additional manuals may be purchased directly from your local
Agilent Technologies Sales office. Specify the model number, serial number prefix, and the manual part number provided
on the title page. (When ordered at the same time as the power supply, additional manuals may be purchased by adding
Option 910 to the order. Each Option 910 includes one Operating and one Service Manual).