Filter
Top Products
1 - General Information
12
Earlier AC Source Models
With the exception of some minor readback specification differences, information in this manual also
applies to the following earlier ac source models:
Information about this
current model
also applies to the following earlier
models:
Agilent 6811B Agilent 6811A AC Power Source/Analyzer
Agilent 6812B Agilent 6812A AC Power Source/Analyzer
Agilent 6841A Harmonic/Flicker Test System
in normal mode
Agilent 6813B Agilent 6813A AC Power Source/Analyzer
Agilent 6842A Harmonic/Flicker Test System
in normal mode
Safety Considerations
This ac source is a Safety Class 1 instrument, which means it has a protective earth terminal. That
terminal must be connected to earth ground through a power source equipped with a ground receptacle.
Refer to the Safety Summary page at the beginning of this guide for general safety information. Before
installation or operation, check the ac source and review this guide for safety warnings and instructions.
Safety warnings for specific procedures are located at appropriate places in the guide.
Options and Parts
Table 1-1. Options
Option Model Description
0BN All Extra documentation
1CM All Rack mount kit (Agilent p/n 5062-3977)
1CP All Rack mount kit with handles (Agilent p/n 5062-3983)
100 Agilent 6811B/6812B 87-106 Vac, 48-63 Hz (Japan only)
200 Agilent 6813B 174-106 Vac, 48-63 Hz (Japan only)
230 Agilent 6811B/6812B 191-254 Vac, 48-63 Hz
831 Agilent 6812B/6813B 12 AWG, 200 to 240 Vac, unterminated
832 Agilent 6813B 4-mm
2
wire size, unterminated
833 Agilent 6812B 1.5-mm
2
wire size, 200 to 240 Vac, unterminated
834 Agilent 6812B 10 AWG, 100 to 120 Vac, unterminated
841 Agilent 6812B/6813B Line cord with NEMA 6-20P; 20A, 250 V plug
842 Agilent 6813B Line cord with IEC 309; 32A, 220 V plug
844 Agilent 6813B Line cord with NEMA 6-30P; 30A, 250 V locking plug
845 Agilent 6812B Line cord with IEC 309; 16 A, 220 V plug
846 Agilent 6812B Line cord with NEMA L5-30P; 30 A, 120 V plug
847 Agilent 6812B Line cord with CEE 7/7; 16 A, 220 V plug
848 Agilent 6812B Line cord with BS 546; 15 A, 240 V plug
Support rails (
Agilent p/n 1494-0059) are required when rack mounting units with options 1CM and 1CP.
Agilent 6811B units are shipped with the correct line cord for the destination country.