A SERVICE OF

logo

13
Product Presentation
Indicators
10/19/2009 TTP 8000 Technical Manual P1003638-003
Control Board Indicators
The control board has two power indicators behind the power connector. To see the indicators,
open the printhead and look down between the platen and the printer frame.
Table 2 • Warning Codes
Number of
Flashes
Warning Code Description
2 Paper low
Note • This signaling is disabled by default. It can be
disabled/enabled through parameter setup
3 Weekend low*
*. Warning-codes are reset automatically when the cause for them are removed.
Table 3 • Control Board Indicators
Green indicator constantly ON 24 V present
Red indicator constantly ON 5 V OK (generated on control board)