Specifications
Print Specifications by Model
23063L-001 Rev. 2 6/21/2004 RXiIIIPlus User Guide 117
Print Specifications by Model
Refer to the key and the table that follows for printer specifications.
Model Specifications Key This table contains the key for print specifications for the table
that follows.
Non-Continuous printing (gap, notch, or hole between labels).
Continuous printing (no gap, notch or hole).
Ladder (rotated) orientation.
Picket fence (nonrotated) orientation.
Print Specifications R110XiIIIPlus 200 dpi
Printhead resolution 203 dots/inch (8 dots/mm)
Dot size (width×length) 0.0049×0.0049 in. (0.125×0.125 mm)
First dot location (measured from inside
media edge)
0.10 ± 0.035 in. (2.5 ± 0.89 mm)
Maximum print width 4.09 in. (104 mm)
Selectable print speeds (inches per second) 2.4, 3 through 10
Maximum Print length 39 in. (991 mm) 150 in. (3810 mm)
Bar code modulus (X) dimension 4.9 mil to 49 mil
4.9 mil to 49 mil
Thin film printhead with Element Energy
Equalizer (E
3
)
®
Yes
