56
2. Use S or T to highlight your area, and
press [ENTER].
3. Enter the Time and Date. The cursor
appears at the first character in the time
field. To set the time:
a. Use S and T to increase or
decrease the number.
b. Use W and X to move the cursor to
the next or previous number
position.
c. When the time is correct, press
[ENTER] to move to the date field.
Set the date using the same
procedure as setting the time.
d. When you are finished setting the
date, press [ENTER] to highlight
the
Done field, and press [ENTER].
Mystic OM.book Page 56 Wednesday, October 22, 2003 8:59 PM
