80
PS
Select this to allow the GA-1140 to print only PS jobs.
: “PS” emulation is available only when the PS3 Upgrade (GE-1020) or PS3 Scan & HDD
Upgrade (GE-1060+GE-1110) is installed.
4
Emulation Setup is completed. Exit the Setting
menu and switch to On-line.
P20 “Switching to On-line/Off-line”
Setting up from TopAccess
1
Accessing the TopAccess for Administrator.
P23 “Accessing TopAccess for Administrator”
2
Accessing the Printer Setup page.
1. Click on the Printer SETUP menu.
2. Click on the Printer tab.
3
Enter each item explained below and click on
[SETUP].
Emulation Mode
This option allows the GA-1140 to restrict to PCL or PostScript jobs, respectively. Jobs sent
to the GA-1140 that do not match the mode selected here are not printed.
Auto Select - Select this not to restrict to print. In Auto mod, the GA-1140 switches to the
appropriated page description language for each job.
PCL - Select this to allow the GA-1140 to print only PCL jobs.
PS - Select this to allow the GA-1140 to print only PS jobs.
